Defects & Contamination

Analysis of a range of solid, gaseous and surface defects and inclusions for all types of glass - from compositional analysis of inclusions, stone, cord, knot, bubbles or blisters to delamination, misting, bloom and assessment of forming defects or quality concerns in finished products.

Our specialist knowledge in glass and glass development allows us to provide reports for simple compositional data, or full assessment, conclusions and potential causes of glass defects in order to help resolve production issues.

Services can be provided on a standard (10 working days), fast (2-5 working days) or urgent (within 24hrs) basis.

Please contact us, or make an enquiry using the form above, if you have any bespoke requirements, require further information, or would like a quote for analysis.

For further information, please see:

Inclusions, Stone, Cord and Knot

Stone and cord in glass can lead to significant losses in production. Rapid analysis identifies the likely cause minimising production losses. Working closely with the customer GTS can identify the cause of the problem and recommend remedial action. This service is designed for tight production schedules and an express service is available to provide results within a few hours of sample receipt. 

This service is carried out using an extensive range of analytical facilities including optical microscopy and scanning electron microscopy (SEM) with microanalysis (EDS) and can be backed up by wet chemical analysis and other analytical techniques. 

Contamination Analysis

Composition analysis to determine the source of the foreign material to determine remedial action.

Bubble and Blister Analysis

We provide specialist analysis of bubble defects in glass utilising our portable bubble gas analysis system. The equipment can analyse the component gases held within bubbles and blisters.

The occurrence of bubble/blister in glass can lead to significant losses in production. The potential causes of an outbreak are wide ranging. Therefore the identification of gas components and relative pressures can be crucial in determining the possible sources of the bubble/blister and eliminating the problem. 

A portable quadropole mass spectrometer is used to analyse the gaseous components of bubbles. Gases routinely analysed for are: water (H 2 O), nitrogen (N 2 ), oxygen (O 2 ), argon (Ar 2 ), carbon dioxide (CO 2 ), sulphur dioxide (SO 2 ), carbon oxy-sulphide (COS), hydrogen sulphide (H 2 S). Analysis for other gases can be performed upon request. This can be provided on a same or next day service, with experienced opinions provided in addition to analytical results. Our focus is to provide rapid analysis either within our laboratories or on-site. 

The service is backed by an extensive range of on-site analytical techniques including scanning electron microscopy (SEM).

This information allows our team to use their specialist knowledge and experience of glass manufacture to determine the likely causes of these defects.

Coatings, Surfaces and Delamination

The surface of glass can be a source of unique and wide-ranging problems and the properties of glass surfaces can be very different to the bulk (glass) properties. This is critical to issues such as adhesion, coatings and durability. We have extensive experience and knowledge in the analysis and understanding of glass surfaces to tackle a range of surface related issues, including:

  • Bloom and weathering;
  • Decorative coatings;
  • Adhesion;
  • Surface contamination;
  • Delamination;
  • Hot-end coating durability;
  • Cap / glass interactions.

Forming Defects

Visual assessment, combined with chemical analysis where required, is conducted to identify and assess forming issues for a range of glass products in order to advise clients on remedial action. Please see our visual quality assessment service for further information. 

Please contact us, or make an enquiry using the form above, if you have any bespoke requirements, require further information, or would like a quote for analysis.

Make an Enquiry